Application Commercial
Description
The LCN SEM7800 Series are heavy-duty, electrically controlled door holding magnets. Magnets are fail-safe and hold until the current is interrupted. A manual door closer is used to control and close the door. A choice of floor, recessed wall or surface-mounted wall magnets are available.
All SEM Series magnets are UL listed for smoke barrier or labelled fire doors. Tested and certified under ANSI Standard A156.15.
7840 is suitable for use in pocket door installations. Die-cast housing, low profile recessed wall mount.
7830 is suitable for use in surface wall mounting.
7820 is suitable for use in floor-mounted installations.
Warranty
Mechanical - 10 years
Electronic - 1 year
Finish - Refer to allegion.co.nz/finisheswarranty
SEM 7820 Specifications
Door type Timber or metal
Door size External door 610mm - 1219mm, internal door 610mm - 1524mm
Handing Non-handed
Strength 15.9kg holding force
Body material Die cast housing
Input voltage Tri voltage design 12V DC, 24V DC or 24V AC
Door type Timber or metal
Door size External door 610mm - 1219mm, internal door 610mm - 1524mm
Handing Non-handed
Strength 15.9kg holding force
Body material Die cast housing
Input voltage Tri voltage design 12V DC, 24V DC or 24V AC
SEM 7840 Specifications
Door type Timber or metal
Door size External door 610mm - 1219mm, internal door 610mm - 1524mm
Handing Non-handed
Strength 15.9kg holding force
Body material Die cast housing
Input voltage Tri voltage design 12V DC, 24V DC or 24V AC
© Allegion plc, 2022 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer